Field of application

Spray-like ENTRAINMENT

... the opportunity to quantify sprays image-based and inline.
... high-contrast and true-to-scale image acquisition – an essential requirement for high-performance image analysis.
... a variable measurement volume that allows representative measurements and easy cleaning.
... precise imaging of particles of different sizes.

Problem - Solution - Your advantages

Reduced solvent loss and thus lower raw material demand.
Protection of downstream equipment and thus reduced equipment failures or downtime.
Acquisition of mass and energy balance of the process.
Compliance with (legal) requirements for the purity of gas streams.

Problem - Solution - Your advantages

Reduced solvent loss and thus lower raw material demand.
Protection of downstream equipment and thus reduced equipment failures or downtime.
Acquisition of mass and energy balance of the process.
Compliance with (legal) requirements for the purity of gas streams.

Development & investigation of column inlays in R&D labs/testing facilities (spray-like entrainment and draining behavior of lamella & wire-knitted separators, injectors & dispensers, trays & packings).
Goal: Reduction in plant size and pressure drop.
Industry sectors: Chemical industry, petroleum processing.

Problem - Solution - Your advantages

Design uncertainties due to unpredictable phase behavior for unknown component systems or known component systems in unknown plant dimensions.
Reduction of the design uncertainties only with cost-intensive or technically not feasible experiments.
Unnecessarily large safety margins increase material costs and operating costs due to increased pressure drop.
Increased safety margins to maintain conformity with the defined limits of TA-Luft (German clean air act).

Problem - Solution - Your advantages

Design uncertainties due to unpredictable phase behavior for unknown component systems or known component systems in unknown plant dimensions.
Reduction of the design uncertainties only with cost-intensive or technically not feasible experiments.
Unnecessarily large safety margins increase material costs and operating costs due to increased pressure drop.
Increased safety margins to maintain conformity with the defined limits of TA-Luft (German clean air act).

	Entrain
Installation	One-sided as probe via standard apparatus access
Particle size range (µm)	10 – 4.000
Accuracy	On request (internally validated)
Temperature (°C)	25 to 100
Pressure (bar abs)	0.1 to 1 or 1 to 10
ATEX certification	On request
Food certification according to EG1935/2004	On request
Material	Stainless steel, Hastelloy version on request